Aftercare
- Keep your windows rolled up for the first 48–72 hours while the adhesive bonds to the glass.
- A hazy look or small water pockets under the film are normal during curing and evaporate in the Texas sun.
- Clean tinted glass with an ammonia-free glass cleaner and a soft microfiber towel—never abrasive pads or razor blades.
Warranty
Every window film we install carries a lifetime manufacturer warranty against purpling, bubbling, peeling and delamination.
Aftercare
- Wait about 7 days before the first wash so the film edges fully set.
- Hand wash or use touchless washes only—automatic brushes can lift edges and mar the finish.
- Avoid aiming high-pressure washer nozzles directly at film edges and seams.
Warranty
Our 3M paint protection films carry a 10-year consumer warranty backed by 3M against yellowing, cracking and bubbling.
Aftercare
- Keep the vehicle dry for the first 24–48 hours after coating.
- Avoid soap washes for the first 7 days while the coating fully cures.
- Wash with a pH-neutral car soap using the two-bucket method to keep the coating performing.
Warranty
Our ceramic coating carries a 5-year warranty. We explain the written coverage and applicable terms before installation—proper washing and care still matter.
Aftercare
- Keep wiper blades clean and free of trapped grit so they glide over the film without scuffing.
- Replace worn wiper blades promptly as damaged blades are the most common cause of surface marks.
Warranty
ExoShield GT3+ carries a transferable 3-year limited product warranty through authorized installers, with an optional Glass Protection Warranty available at installation. Available at our Galleria / Hillcroft and FM 1960 / Cypress Creek shops.